 |
 |
 |
 |
This option is designed for 5 Gallon All-Grain Batches
The BrewEasy is a revolutionary new ultra-compact and economical all grain brewing system. This patent pending system and process utilizes a two kettle recirculation infusion mash system called the Kettle-RIMS or K-RIMS process for short. This system is very simple to use and is a very approachable way to transition from extract brewing into all grain brewing. The sparging process is eliminated to simply the process and save time.
The BrewEasy provides all the simplicity of a brew-in-a-bag (BIAB) system, but offers the ramping capability of a traditional RIMS system, eliminates the messy and unsafe lifting of hot grains, and provides wort clarification that BIAB just can't do. Be sure to read through our manual (see the Additional Information tab) to get all the details of the BrewEasy to see why this system may be the ticket for you! Efficient, fast, and lets you BrewEasy!
If you already own some BoilerMaker kettles the BrewEasy can still be a great fit for you as it is modular allowing you to only purchase what you need.
How it works: This two kettle system eliminates the hot liquor tank of a traditional three tier system and does away with the time consuming and somewhat complicated sparging process. While a three tier system is still the most versatile and efficient, the BrewEasy offers significantly more efficiency than a BIAB (Brew in a Bag) system, eliminates the lifting, and generates super clear wort.
Simply start with all of your brewing water (liquor) for your brew day and place about half in the lower pot (boil kettle) and the remainder in the upper pot (mash tun). Set your AutoSparge, turn on the pump, and add heat. The liquor will recirculate from the boil kettle, into the mash tun, and back into the boil kettle. When you're at the desired temperature turn off the pump and add your malt. Completing several temperature rests is as easy as turning on the burner! When you're through your mash simply turn off the pump and let all the wort from your mash tun drain into your brew kettle and boil as normal. It's as simple as that! Looking for automation? Add in the Tower of Power control system and convenient Tower LTE stand!
Items Included:
- 10 Gallon Blichmann Boilermaker (BLC006A) - Used as a Brew Kettle
- 7.5 Gallon Blichmann Boileraker (BLC006F) - Used as a Mash Tun
- BrewEasy Lid Adapter (BLC038A) - Used for converting into a single system
- Auto Sparge (BLC029) - Includes hole punched
- All necessary hoses and fittings
- False Bottom (BLC007F)
- Blichmann BoilCoil (BLC041)
- Tower of Power Control Module
- Tower of Power LTE - Tower that includes fitting for temperature sensor and a flow control valve
- Pump
Note: The BoilCoil includes a "plug and play" 12 ft factory wired cable with a molded twist-lock L6-30P plug on one end, and our custom removable plug on the other end. 240V
Please allow 2-3 Weeks for delivery.
Official Blichmann BrewEasy Instruction Manual
The chart below shows how to configure your modular BrewEasy system. The core of the system is two BoilerMaker pots and an adapter lid kit. The system sizes are for a finished batch size of 5, 10, or 20 gal
The following components are required for your system. If you already own one or more components you'll want to buy just what you need. If you're just getting started love2brew provides complete systems of all sizes.
The following describes what you'll need. For more details be please download the BrewEasy manual located above.
Required: BoilerMaker Brewing Kettles (BLC006) - The BrewEasy requires two Blichmann Engineering BoilerMaker pots. The adapter lids and tubing are not designed to accommodate other manufacturer’s pots. The upper pot is the mash tun and the lower pot is the boil kettle. Use the following chart to confirm that you have the correct size pots. You'll also need a false bottom for your mash tun.
Batch
Size
|
Mash Tun (upper pot)
|
Boil Kettle (lower pot)
|
5
gal (19 L)
|
7.5 gal
|
10 gal
|
10
gal (38 L)
|
15 gal
|
20 gal
|
20
gal (76 L)
|
30 gal
|
30 gal
|
Required: Adapter Lid Kit - This is the heart of the system and includes the special lid that allows the pots to be stacked and the wort drain tube installed. It includes the lid, an AutoSparge level and flow control system, a drain tube with flow orifice kit, and all the misc. fittings, silicone hose, and QuickConnector fittings you'll need to get up and running.
Required: BoilCoil (BLC041) The BoilCoil includes a "plug and play" 12 ft factory wired cable with a molded twist-lock L6-30P plug on one end, and our custom removable plug on the other end.
Required: Chugger Pump (CGP001 / CGP002 / CGP003) - A single pump is required to operate your BrewEasy brewing system.
Optional: Tower of Power Temperature Controller (Full - BLC034 or LTE - BLC038) - While automated control is not required for operation, it does greatly simplify control of mashing temperatures and offers significantly more accuracy and repeatability than can be achieved manually. We offer two convenient stands for your controller and accessories. The compact size Tower of Power LTE features built in GFCI protection, a power receptacle, pump mount, pump switch, and optional pump, optional Therminator chiller and mount, sensor fitting and flow throttling valve. The full Tower of Power adds wort sampling, stuck mash alarm, and visual flow meter.
Optional: KettleKart - The KettleKart adds mobility to your BrewEasy brewing system. One of the many great features of this system is its compact nature. Use the KettleKart to tuck your system out of the way between brew days! A parts and assembly manual is included with the product. NOTE: this product not yet available
|
|
 |
 |
 |
 |

|