Class A precision RTD temp sensor. The sensor can be installed in any 1/4" hole in your pot for an HLT or into any 1/4" NPT fitting with an optional adapter bushing. While originally designed for the Tower of Power this sensor may be used for other brewing applications. Includes temperature sensor and appropriate fittings for weldless installations. Cable sold separately as an option. If you would like to incorporate this sensor into a 1/2" hole you can use our 1/2' MPT x 1/4" FPT Bushing (FIT015A).
Note: This sensor is for the Generation 2 Tower of Power; if you require a probe for a Generation 1 please make a note in your order comments. Generation 1 Connector port is flat, the Generation 2 connector port sticks out a bit.
Fittings: 1/2" NPT male
Power: 3500 W
Voltage: 240V
Amperage: 14.6A
Recommended GFCI breaker: 20A
Plug: Molded L6-30P X Blichmann custom removable plug
Cable: 12ga, 12 ft (3.5M) ultra flexible
Ramp Rate formula in °F/minute: 23.8/gal of wort
|
