The Tower of Power is a fully automated RIMS (Recirculation Infusion Mash System) brewery with programmable specifications for use in your home. This system will monitor your temperatures, turn your burners on and off, start and stop pumps for recirculation or sparging, and more. Hold mash or sparge water temps within 0.5°F, perform complex multi-step mashes with ease, and achieve professional brewery-level efficiency from your grain.

The system is adaptable and adjustable to your needs. The basic component is the Control Enclosure, you will need one for your mash tun and you may add another to control your sparge tank as well. The optional Pump Tower is a free-standing unit that is available with or without a Chugger Pump (Please note that March Pump will also work with this setup.) This unit is great for RIMS but may also be used for regular mashing and sparging. The optional Communications Cable allows you to connect the control unit to a computer; using the free software (Windows XP, Vista, and 7 only) you can program your schedules and control the system remotely. The optional Bushing allows you to install the Control Enclosure's temperature probe on 1/2" NPT threads instead of a 1/2" hole.

Control Enclosure - Each control enclosure includes the following:

• High precision and accuracy PID controller and Class A precision RTD temp sensor.
• Sensor can be installed in any 1/2" hole in your pot for a HLT or into any 1/2" NPT fitting with the included adapter bushing.
• A pilotless electronic ignition control system that adapts to any gas or propane burner (not restricted to Blichmann Burners) The igniter will relight your burner if the flame blown out by a wind and will shut down your gas if a flame is not detected within 10 sec sounding an alarm. Includes industrial ignition electrode and high quality silicone/carbon fiber ignition wire.
• US made gas solenoid valve (installs on your burner gas supply).
• Data port for optional remote monitoring and mash profile programming (unlimited profiles) on your PC (optional communication cable required).
• Convenient cable storage tray in the back of the enclosure to neatly store wires between uses.
• Includes a decal for MASH and one for HLT (Hot Liquor Tank) so you can label appropriately.
• Compact enclosure is 4.25"W, 7"H, 7"D - easy to integrate into your brew system.
• Brushed stainless cover and gloss black powder coated case will look beautiful for years.

Pump Tower - This optional free standing RIMS plumbing tower offers the following features:

• Low Velocity Fluid Pump - Optional; a pump is required for operation however it is an optional purchase item. You may incorporate existing Chugger Pumps into your system.
• Flow meter to set your mash recirculation rate and your lauter rate. Flow meter also acts as a visual wort color/clarity sight-glass. Adjustable low-flow alarm sounds a horn if your mash begins to stick or your flow slows for any reason.
• Conveniently mount one or two control modules (optional mounting plate required for second control).
• Tower includes integral GFCI receptacle for safety.
• Cleanup is simple, the only thing you will need is a bottling bucket.
• Gloss black powder coated tower that will look beautiful for years.

Product Dimensions:

• Control enclosure: 4.25"W, 7"H, 7"D
• Power requirement: 2A 120V 60Hz (pump tower and controller)